SCADAPack E outstations have three internal tables that Geo SCADA Expert is capable of configuring. By configuring these tables, you can use a SCADAPack E outstation to:
- Route DNP3 traffic (see Route DNP3 Frames Using a DNP Route Table)
- Route IP traffic (see Use an IP Route Table to Route TCP/IP Packets to Another TCP/IP Host)
- Set the IP address of other devices using the BOOTP protocol (see Add and Configure the Entries in a BOOTP Table).
In order to configure these tables, you will need to:
- Add a DNP3 SCADAPack Table.
- Display the Table.
- Specify the Table Size.
- Add the required entries to the table—see as appropriate:
Further Information
Import entries into BOOTP, IP Route, and DNP Route Tables using the Automation Interface: see DNP3 SCADAPack E Automation Interface Methods.
Route DNP3 Frames Using a DNP Route Table.
Use an IP Route Table to Route TCP/IP Packets to Another TCP/IP Host.