This section does not apply to DNP3 SCADAPack output points that are controlled exclusively by another application, rather than Geo SCADA Expert. (For further information, see Specify Whether an Output Point is Controlled by Geo SCADA Expert in the Geo SCADA Expert Guide to the DNP3 Driver.)
For DNP3 SCADAPack output points that can be controlled by Geo SCADA Expert, use the fields at the bottom of the Control tab to define the DNP3- and SCADAPack-specific control properties of the point.
For information on the first four fields, see Configure the DNP3-Specific Control Properties on DNP3 Output Points in the Geo SCADA Expert Guide to the DNP3 Driver.
For information on the Interlock fields, see Configure an Output Point or Pulse Action’s Interlock Properties.